make[1]: Entering directory '/srv/build/amery/sunxi/sunxi-nightly/build_u-boot-mainline/build_yones_toptech_bs1078_v2' GEN ./Makefile # # configuration written to .config # make[1]: Leaving directory '/srv/build/amery/sunxi/sunxi-nightly/build_u-boot-mainline/build_yones_toptech_bs1078_v2' make[1]: Entering directory '/srv/build/amery/sunxi/sunxi-nightly/build_u-boot-mainline/build_yones_toptech_bs1078_v2' GEN ./Makefile scripts/kconfig/conf --silentoldconfig Kconfig CHK include/config.h CFG u-boot.cfg GEN include/autoconf.mk.dep CFG spl/u-boot.cfg GEN include/autoconf.mk GEN spl/include/autoconf.mk *** Your GCC is older than 6.0 and will not be supported starting in v2018.01. CHK include/config/uboot.release CHK include/generated/timestamp_autogenerated.h GEN ./Makefile UPD include/generated/timestamp_autogenerated.h UPD include/config/uboot.release Using /srv/build/amery/sunxi/sunxi-nightly/u-boot-sunxi-mainline as source for U-Boot CHK include/generated/version_autogenerated.h UPD include/generated/version_autogenerated.h CC lib/asm-offsets.s CC arch/arm/lib/asm-offsets.s CHK include/generated/generic-asm-offsets.h CHK include/generated/asm-offsets.h HOSTCC tools/mkenvimage.o HOSTCC tools/fit_image.o HOSTCC tools/image-host.o HOSTCC tools/dumpimage.o HOSTCC tools/mkimage.o HOSTCC tools/sunxi-spl-image-builder.o HOSTLD tools/mkenvimage HOSTLD tools/sunxi-spl-image-builder HOSTLD tools/dumpimage HOSTLD tools/mkimage CC board/sunxi/board.o CC arch/arm/mach-sunxi/board.o CC disk/part_efi.o CC arch/arm/cpu/armv7/sunxi/psci.o CC arch/arm/lib/bootm.o {standard input}: Assembler messages: {standard input}:344: Error: push/pop do not support {reglist}^ -- `pop {r0,r1,r2,r3,r4,r9,ip,pc}^' CC cmd/bootm.o CC drivers/core/device.o CC arch/arm/mach-sunxi/usb_phy.o CC common/main.o LD board/sunxi/built-in.o CC cmd/version.o /srv/build/amery/sunxi/sunxi-nightly/u-boot-sunxi-mainline/scripts/Makefile.build:280: recipe for target 'arch/arm/cpu/armv7/sunxi/psci.o' failed make[3]: *** [arch/arm/cpu/armv7/sunxi/psci.o] Error 1 /srv/build/amery/sunxi/sunxi-nightly/u-boot-sunxi-mainline/scripts/Makefile.build:425: recipe for target 'arch/arm/cpu/armv7/sunxi' failed make[2]: *** [arch/arm/cpu/armv7/sunxi] Error 2 /srv/build/amery/sunxi/sunxi-nightly/u-boot-sunxi-mainline/Makefile:1257: recipe for target 'arch/arm/cpu/armv7' failed make[1]: *** [arch/arm/cpu/armv7] Error 2 make[1]: *** Waiting for unfinished jobs.... LD arch/arm/lib/built-in.o CC cmd/bootefi.o CC drivers/core/fdtaddr.o CC drivers/input/keyboard-uclass.o CC common/autoboot.o CC common/board_f.o CC drivers/core/lists.o CC drivers/input/input.o LD disk/built-in.o LD arch/arm/mach-sunxi/built-in.o CC drivers/input/key_matrix.o CC drivers/core/root.o CC cmd/ext4.o CC drivers/core/uclass.o CC common/board_r.o CC drivers/core/device-remove.o CC common/bootm.o CC cmd/gpio.o LD drivers/input/built-in.o CC drivers/core/simple-bus.o CC drivers/core/dump.o CC common/env_callback.o CC cmd/mmc.o CC drivers/mmc/mmc.o CC drivers/mmc/mmc_legacy.o CC drivers/mmc/mmc_write.o CC drivers/mmc/sunxi_mmc.o CC drivers/core/of_extra.o CC common/env_flags.o CC drivers/core/ofnode.o CC cmd/usb.o CC cmd/nvedit.o CC common/env_mmc.o CC common/fdt_support.o CC common/miiphyutil.o CC common/usb.o LD drivers/core/built-in.o CC common/usb_hub.o LD drivers/mmc/built-in.o LD cmd/built-in.o CC common/usb_storage.o CC common/edid.o CC drivers/video/cfb_console.o CC drivers/video/sunxi/sunxi_display.o CC common/usb_kbd.o CC drivers/video/sunxi/lcdc.o CC common/env_common.o CC common/console.o CC common/image.o CC common/stdio.o CC common/cli.o LD drivers/video/sunxi/built-in.o LD drivers/video/built-in.o LD common/built-in.o LD drivers/built-in.o make[1]: *** wait: No child processes. Stop. Makefile:150: recipe for target 'sub-make' failed make: *** [sub-make] Error 2