make[1]: Entering directory '/srv/build/amery/sunxi/sunxi-nightly/build_u-boot-mainline/build_orangepi_pc' GEN ./Makefile # # configuration written to .config # make[1]: Leaving directory '/srv/build/amery/sunxi/sunxi-nightly/build_u-boot-mainline/build_orangepi_pc' make[1]: Entering directory '/srv/build/amery/sunxi/sunxi-nightly/build_u-boot-mainline/build_orangepi_pc' GEN ./Makefile scripts/kconfig/conf --silentoldconfig Kconfig CHK include/config.h CFG u-boot.cfg GEN include/autoconf.mk.dep CFG spl/u-boot.cfg GEN include/autoconf.mk GEN spl/include/autoconf.mk *** Your GCC is older than 6.0 and will not be supported starting in v2018.01. CHK include/config/uboot.release CHK include/generated/timestamp_autogenerated.h GEN ./Makefile UPD include/generated/timestamp_autogenerated.h UPD include/config/uboot.release Using /srv/build/amery/sunxi/sunxi-nightly/u-boot-sunxi-mainline as source for U-Boot CHK include/generated/version_autogenerated.h UPD include/generated/version_autogenerated.h CC lib/asm-offsets.s CC arch/arm/lib/asm-offsets.s CHK include/config.h CFG u-boot.cfg CHK include/generated/asm-offsets.h CHK include/generated/generic-asm-offsets.h HOSTCC tools/mkenvimage.o HOSTCC tools/fit_image.o HOSTCC tools/image-host.o HOSTCC tools/dumpimage.o HOSTCC tools/mkimage.o HOSTCC tools/sunxi-spl-image-builder.o HOSTLD tools/mkenvimage HOSTLD tools/dumpimage HOSTLD tools/mkimage HOSTLD tools/sunxi-spl-image-builder CC board/sunxi/board.o CC arch/arm/cpu/armv7/cache_v7.o CC arch/arm/mach-sunxi/board.o CC disk/part.o CC arch/arm/lib/bootm-fdt.o CC drivers/block/blk_legacy.o CC cmd/boot.o CC common/init/board_init.o LD common/init/built-in.o CC arch/arm/mach-sunxi/clock.o LD drivers/block/built-in.o CC arch/arm/cpu/armv7/cpu.o CC arch/arm/lib/bootm.o LD board/sunxi/built-in.o CC common/main.o CC arch/arm/lib/zimage.o CC drivers/core/device.o CC cmd/bootm.o CC arch/arm/lib/stack.o CC arch/arm/mach-sunxi/cpu_info.o CC disk/part_dos.o CC arch/arm/cpu/armv7/cp15.o CC arch/arm/cpu/armv7/syslib.o CC common/exports.o CC arch/arm/lib/interrupts.o CC drivers/core/fdtaddr.o CC arch/arm/mach-sunxi/dram_helpers.o CC arch/arm/mach-sunxi/pinmux.o CC arch/arm/cpu/armv7/virt-v7.o CC common/hash.o CC cmd/help.o CC arch/arm/lib/reset.o CC drivers/core/lists.o CC arch/arm/lib/cache.o CC disk/part_iso.o CC arch/arm/cpu/armv7/virt-dt.o CC arch/arm/mach-sunxi/usb_phy.o CC cmd/version.o CC common/cli_hush.o CC cmd/blk_common.o CC arch/arm/lib/cache-cp15.o CC arch/arm/lib/psci-dt.o CC arch/arm/cpu/armv7/sunxi/timer.o CC drivers/core/root.o CC disk/part_efi.o CC cmd/source.o CC cmd/bdinfo.o CC arch/arm/mach-sunxi/prcm.o CC arch/arm/lib/eabi_compat.o CC arch/arm/cpu/armv7/sunxi/psci.o CC arch/arm/mach-sunxi/rsb.o LD arch/arm/lib/built-in.o CC drivers/crypto/fsl/sec.o CC cmd/bootefi.o CC common/autoboot.o CC drivers/core/uclass.o {standard input}: Assembler messages: {standard input}:344: Error: push/pop do not support {reglist}^ -- `pop {r0,r1,r2,r3,r4,r9,ip,pc}^' /srv/build/amery/sunxi/sunxi-nightly/u-boot-sunxi-mainline/scripts/Makefile.build:280: recipe for target 'arch/arm/cpu/armv7/sunxi/psci.o' failed make[3]: *** [arch/arm/cpu/armv7/sunxi/psci.o] Error 1 /srv/build/amery/sunxi/sunxi-nightly/u-boot-sunxi-mainline/scripts/Makefile.build:425: recipe for target 'arch/arm/cpu/armv7/sunxi' failed make[2]: *** [arch/arm/cpu/armv7/sunxi] Error 2 /srv/build/amery/sunxi/sunxi-nightly/u-boot-sunxi-mainline/Makefile:1279: recipe for target 'arch/arm/cpu/armv7' failed make[1]: *** [arch/arm/cpu/armv7] Error 2 make[1]: *** Waiting for unfinished jobs.... CC drivers/core/util.o LD drivers/crypto/fsl/built-in.o LD drivers/crypto/built-in.o CC drivers/core/device-remove.o CC arch/arm/mach-sunxi/clock_sun6i.o CC drivers/core/simple-bus.o CC common/board_f.o CC cmd/bootz.o CC cmd/console.o LD arch/arm/mach-sunxi/built-in.o CC cmd/echo.o CC common/board_r.o CC cmd/elf.o CC cmd/exit.o CC drivers/core/dump.o CC cmd/ext4.o CC drivers/core/of_extra.o LD disk/built-in.o CC drivers/core/ofnode.o CC drivers/core/read_extra.o CC cmd/ext2.o CC drivers/input/keyboard-uclass.o CC drivers/input/input.o CC drivers/input/key_matrix.o CC cmd/fat.o CC common/board_info.o CC cmd/fdt.o CC cmd/fs.o CC common/bootm.o CC cmd/gpio.o CC common/bootm_os.o CC common/fdt_support.o LD drivers/core/built-in.o CC common/miiphyutil.o CC common/usb.o LD drivers/input/built-in.o CC cmd/i2c.o CC drivers/mmc/mmc.o CC cmd/itest.o CC cmd/load.o CC drivers/mmc/mmc_legacy.o CC drivers/mmc/mmc_write.o CC drivers/mmc/sunxi_mmc.o CC cmd/mem.o CC cmd/mii.o CC common/usb_hub.o CC cmd/mdio.o CC cmd/misc.o CC common/usb_storage.o CC common/iomux.o CC common/edid.o CC drivers/rtc/date.o CC cmd/mmc.o CC common/splash.o CC common/menu.o LD drivers/rtc/built-in.o CC common/usb_kbd.o CC cmd/net.o CC common/cli_readline.o LD drivers/mmc/built-in.o CC common/cli_simple.o CC drivers/video/display-uclass.o CC common/console.o CC drivers/video/backlight-uclass.o CC cmd/part.o CC common/dlmalloc.o CC drivers/video/panel-uclass.o CC common/malloc_simple.o CC cmd/pcmcia.o CC common/image.o CC drivers/video/simple_panel.o CC drivers/video/video-uclass.o CC cmd/pxe.o CC drivers/video/vidconsole-uclass.o CC cmd/setexpr.o CC cmd/test.o CC cmd/usb.o CC cmd/disk.o CC drivers/video/video_bmp.o CC common/image-fdt.o CC common/memsize.o CC drivers/video/console_normal.o CC common/stdio.o CC cmd/ximg.o CC cmd/nvedit.o CC common/cli.o CC common/command.o CC common/s_record.o CC common/xyzModem.o CC drivers/video/sunxi/sunxi_de2.o CC drivers/video/sunxi/sunxi_dw_hdmi.o CC drivers/video/sunxi/lcdc.o CC drivers/video/sunxi/../dw_hdmi.o LD cmd/built-in.o LD common/built-in.o LD drivers/video/sunxi/built-in.o LD drivers/video/built-in.o LD drivers/built-in.o make[1]: Leaving directory '/srv/build/amery/sunxi/sunxi-nightly/build_u-boot-mainline/build_orangepi_pc' Makefile:150: recipe for target 'sub-make' failed make: *** [sub-make] Error 2