make[1]: Entering directory '/srv/build/amery/sunxi/sunxi-nightly/build_u-boot-mainline/build_itead_ibox_a20' GEN ./Makefile HOSTCC scripts/basic/fixdep HOSTCC scripts/kconfig/conf.o HOSTCC scripts/kconfig/zconf.tab.o HOSTLD scripts/kconfig/conf # # configuration written to .config # make[1]: Leaving directory '/srv/build/amery/sunxi/sunxi-nightly/build_u-boot-mainline/build_itead_ibox_a20' make[1]: Entering directory '/srv/build/amery/sunxi/sunxi-nightly/build_u-boot-mainline/build_itead_ibox_a20' GEN ./Makefile scripts/kconfig/conf --silentoldconfig Kconfig CHK include/config.h CFG u-boot.cfg GEN include/autoconf.mk.dep CFG spl/u-boot.cfg GEN include/autoconf.mk GEN spl/include/autoconf.mk *** Your GCC is older than 6.0 and will not be supported starting in v2018.01. CHK include/config/uboot.release CHK include/generated/timestamp_autogenerated.h GEN ./Makefile UPD include/generated/timestamp_autogenerated.h CHK include/config.h CFG u-boot.cfg UPD include/config/uboot.release Using /srv/build/amery/sunxi/sunxi-nightly/u-boot-sunxi-mainline as source for U-Boot CHK include/generated/version_autogenerated.h UPD include/generated/version_autogenerated.h CHK include/generated/generic-asm-offsets.h CHK include/generated/asm-offsets.h HOSTCC tools/bmp_logo HOSTCC tools/gen_eth_addr HOSTCC tools/lib/crc8.o HOSTCC tools/img2srec HOSTCC tools/mkenvimage.o HOSTCC tools/os_support.o HOSTCC tools/fit_image.o HOSTCC tools/image-host.o HOSTCC tools/lib/md5.o HOSTCC tools/mxsimage.o HOSTCC tools/pbl_crc32.o HOSTCC tools/lib/rc4.o HOSTCC tools/lib/sha1.o HOSTCC tools/lib/sha256.o HOSTCC tools/dumpimage.o HOSTCC tools/mkimage.o HOSTCC tools/sunxi-spl-image-builder.o HOSTCC tools/lib/bch.o HOSTCC tools/proftool tools/bmp_logo --gen-info /srv/build/amery/sunxi/sunxi-nightly/u-boot-sunxi-mainline/tools/logos/denx.bmp > include/bmp_logo.h tools/bmp_logo --gen-data /srv/build/amery/sunxi/sunxi-nightly/u-boot-sunxi-mainline/tools/logos/denx.bmp > include/bmp_logo_data.h HOSTLD tools/gen_ethaddr_crc HOSTLD tools/mkenvimage HOSTLD tools/dumpimage HOSTLD tools/mkimage HOSTLD tools/sunxi-spl-image-builder AS arch/arm/cpu/armv7/start.o CC drivers/gpio/gpio-uclass.o CC arch/arm/cpu/armv7/sunxi/psci.o CC drivers/gpio/sunxi_gpio.o {standard input}: Assembler messages: {standard input}:332: Error: push/pop do not support {reglist}^ -- `pop {r0,r1,r2,r3,r4,r9,ip,pc}^' /srv/build/amery/sunxi/sunxi-nightly/u-boot-sunxi-mainline/scripts/Makefile.build:280: recipe for target 'arch/arm/cpu/armv7/sunxi/psci.o' failed make[3]: *** [arch/arm/cpu/armv7/sunxi/psci.o] Error 1 /srv/build/amery/sunxi/sunxi-nightly/u-boot-sunxi-mainline/scripts/Makefile.build:425: recipe for target 'arch/arm/cpu/armv7/sunxi' failed make[2]: *** [arch/arm/cpu/armv7/sunxi] Error 2 /srv/build/amery/sunxi/sunxi-nightly/u-boot-sunxi-mainline/Makefile:1279: recipe for target 'arch/arm/cpu/armv7' failed make[1]: *** [arch/arm/cpu/armv7] Error 2 make[1]: *** Waiting for unfinished jobs.... LD drivers/gpio/built-in.o CC cmd/version.o CC common/main.o CC drivers/video/cfb_console.o CC cmd/gpt.o CC cmd/nvedit.o LD common/built-in.o LD cmd/built-in.o LD drivers/video/built-in.o LD drivers/built-in.o make[1]: *** wait: No child processes. Stop. Makefile:150: recipe for target 'sub-make' failed make: *** [sub-make] Error 2