make[1]: Entering directory '/srv/build/amery/sunxi/sunxi-nightly/build_u-boot-mainline/build_orangepi_pc_plus' GEN ./Makefile # # configuration written to .config # make[1]: Leaving directory '/srv/build/amery/sunxi/sunxi-nightly/build_u-boot-mainline/build_orangepi_pc_plus' make[1]: Entering directory '/srv/build/amery/sunxi/sunxi-nightly/build_u-boot-mainline/build_orangepi_pc_plus' GEN ./Makefile scripts/kconfig/conf --silentoldconfig Kconfig CHK include/config.h CFG u-boot.cfg GEN include/autoconf.mk.dep CFG spl/u-boot.cfg GEN spl/include/autoconf.mk GEN include/autoconf.mk *** Your GCC is older than 6.0 and will not be supported starting in v2018.01. CHK include/config/uboot.release CHK include/generated/timestamp_autogenerated.h GEN ./Makefile UPD include/generated/timestamp_autogenerated.h CHK include/config.h CFG u-boot.cfg UPD include/config/uboot.release Using /srv/build/amery/sunxi/sunxi-nightly/u-boot-sunxi-mainline as source for U-Boot CHK include/generated/version_autogenerated.h UPD include/generated/version_autogenerated.h CHK include/generated/generic-asm-offsets.h CHK include/generated/asm-offsets.h HOSTCC tools/mkenvimage.o HOSTCC tools/aisimage.o HOSTCC tools/atmelimage.o HOSTCC tools/common/bootm.o HOSTCC tools/default_image.o HOSTCC tools/fit_common.o HOSTCC tools/fit_image.o HOSTCC tools/common/image-fit.o HOSTCC tools/image-host.o HOSTCC tools/common/image.o HOSTCC tools/imagetool.o HOSTCC tools/imximage.o HOSTCC tools/kwbimage.o HOSTCC tools/lpc32xximage.o HOSTCC tools/omapimage.o HOSTCC tools/pblimage.o HOSTCC tools/vybridimage.o HOSTCC tools/rkcommon.o HOSTCC tools/rkimage.o HOSTCC tools/rksd.o HOSTCC tools/rkspi.o HOSTCC tools/socfpgaimage.o HOSTCC tools/common/hash.o HOSTCC tools/ublimage.o HOSTCC tools/zynqimage.o HOSTCC tools/zynqmpimage.o HOSTCC tools/lib/libfdt/fdt.o HOSTCC tools/lib/libfdt/fdt_ro.o HOSTCC tools/lib/libfdt/fdt_wip.o HOSTCC tools/lib/libfdt/fdt_rw.o HOSTCC tools/lib/libfdt/fdt_strerror.o HOSTCC tools/lib/libfdt/fdt_addresses.o HOSTCC tools/lib/libfdt/fdt_region.o HOSTCC tools/gpimage.o HOSTCC tools/gpimage-common.o HOSTCC tools/dumpimage.o HOSTCC tools/mkimage.o HOSTCC tools/sunxi-spl-image-builder.o HOSTCC tools/fdtgrep.o HOSTLD tools/mkenvimage HOSTLD tools/dumpimage HOSTLD tools/sunxi-spl-image-builder HOSTLD tools/mkimage HOSTLD tools/fdtgrep CC board/sunxi/board.o CC arch/arm/mach-sunxi/board.o CC disk/part_dos.o CC arch/arm/cpu/armv7/virt-dt.o CC arch/arm/lib/bootm-fdt.o LD arch/arm/cpu/armv7/built-in.o CC common/main.o CC cmd/version.o CC arch/arm/mach-sunxi/usb_phy.o CC arch/arm/lib/bootm.o CC drivers/core/device.o CC drivers/core/fdtaddr.o LD board/sunxi/built-in.o CC drivers/core/lists.o CC cmd/bootefi.o CC common/autoboot.o CC disk/part_efi.o CC arch/arm/lib/psci-dt.o CC drivers/crypto/fsl/sec.o CC common/board_f.o LD arch/arm/mach-sunxi/built-in.o CC common/board_r.o CC common/board_info.o CC cmd/ext4.o LD drivers/crypto/fsl/built-in.o LD drivers/crypto/built-in.o LD arch/arm/lib/built-in.o CC common/bootm.o CC common/bootm_os.o CC drivers/gpio/gpio-uclass.o CC drivers/core/root.o CC cmd/fdt.o CC common/fdt_support.o CC cmd/gpio.o CC cmd/i2c.o CC drivers/core/uclass.o CC drivers/core/util.o LD disk/built-in.o CC drivers/core/device-remove.o CC drivers/core/simple-bus.o CC drivers/core/dump.o CC drivers/gpio/sunxi_gpio.o CC drivers/input/keyboard-uclass.o CC drivers/input/input.o CC drivers/input/key_matrix.o CC common/miiphyutil.o CC drivers/core/of_extra.o LD drivers/gpio/built-in.o CC drivers/core/ofnode.o CC drivers/core/read_extra.o CC common/usb.o CC cmd/usb.o CC common/usb_hub.o CC common/usb_storage.o CC drivers/mmc/mmc.o LD drivers/input/built-in.o CC drivers/mmc/mmc_write.o CC common/edid.o LD drivers/core/built-in.o LD cmd/built-in.o CC drivers/i2c/i2c-uclass.o CC drivers/i2c/mvtwsi.o CC drivers/mmc/sunxi_mmc.o CC common/usb_kbd.o CC drivers/net/sun8i_emac.o CC drivers/net/phy/phy.o LD drivers/i2c/built-in.o CC common/console.o CC common/image.o CC drivers/video/display-uclass.o CC drivers/video/backlight-uclass.o CC drivers/serial/serial-uclass.o LD drivers/mmc/built-in.o CC drivers/serial/ns16550.o LD drivers/net/built-in.o CC common/image-fdt.o CC drivers/video/panel-uclass.o CC drivers/video/simple_panel.o CC drivers/video/video-uclass.o LD drivers/net/phy/built-in.o CC common/stdio.o CC common/cli.o CC drivers/spi/spi.o CC drivers/video/vidconsole-uclass.o LD drivers/serial/built-in.o CC drivers/video/video_bmp.o CC drivers/video/console_normal.o LD drivers/spi/built-in.o CC drivers/usb/common/common.o CC drivers/video/sunxi/sunxi_de2.o CC drivers/video/sunxi/sunxi_dw_hdmi.o CC drivers/video/sunxi/simplefb_common.o LD common/built-in.o LD drivers/usb/common/built-in.o CC drivers/video/sunxi/lcdc.o CC drivers/video/sunxi/../dw_hdmi.o CC drivers/video/sunxi/sunxi_lcd.o CC drivers/usb/host/usb-uclass.o CC drivers/usb/host/ohci-hcd.o CC drivers/usb/host/ohci-sunxi.o CC drivers/usb/host/ehci-hcd.o CC drivers/usb/host/ehci-sunxi.o CC env/mmc.o LD drivers/video/sunxi/built-in.o LD drivers/video/built-in.o LD drivers/built-in.o CC net/eth-uclass.o CC net/eth_common.o CC test/dm/cmd_dm.o LD env/built-in.o Traceback (most recent call last): File "", line 1, in ImportError: No module named libfdt *** binman needs the Python libfdt library. *** Either install it on your system, or try: *** *** sudo apt-get install swig libpython-dev *** *** to have U-Boot build its own version. /srv/build/amery/sunxi/sunxi-nightly/u-boot-sunxi-mainline/Makefile:1383: recipe for target 'checkbinman' failed make[1]: *** [checkbinman] Error 1 make[1]: *** Waiting for unfinished jobs.... CC lib/libfdt/fdt.o LD test/dm/built-in.o CC lib/libfdt/fdt_ro.o CC lib/efi_loader/efi_runtime.o CC lib/efi_loader/efi_console.o CC lib/libfdt/fdt_rw.o CC lib/libfdt/fdt_strerror.o CC lib/libfdt/fdt_sw.o LD net/built-in.o CC lib/libfdt/fdt_wip.o CC lib/libfdt/fdt_empty_tree.o CC lib/libfdt/fdt_addresses.o CC lib/libfdt/fdt_region.o CC lib/smbios.o CC lib/efi_loader/efi_device_path.o CC lib/efi_loader/efi_gop.o CC lib/efi_loader/efi_disk.o CC lib/fdtdec_common.o CC lib/fdtdec.o CC lib/display_options.o LD drivers/usb/host/built-in.o LD lib/libfdt/built-in.o CC lib/efi_loader/helloworld.o CC lib/time.o LD lib/efi_loader/helloworld_efi.so LD lib/efi_loader/built-in.o OBJCOPY lib/efi_loader/helloworld.efi rm lib/efi_loader/helloworld_efi.so lib/efi_loader/helloworld.o LD lib/built-in.o make[1]: Leaving directory '/srv/build/amery/sunxi/sunxi-nightly/build_u-boot-mainline/build_orangepi_pc_plus' Makefile:150: recipe for target 'sub-make' failed make: *** [sub-make] Error 2